16 channels Madrix software artnet to DMX/SPI WS2812 WS2811 WS2801 pixel led ethernet controller
Specification:
Model |
BC-216 |
Working Voltage |
DC5V-24V |
Output Current |
3A*16 channels (Built-in 5A fuse) |
Input Ethernet control protocol |
Artnet, E1.31 |
Output Control IC |
WS2801, WS2803
P9813
TLS3001, TLS3002
LPD8803, LPD8806, LPD8809, LPD8812
LPD6803, LPD1101, D701, UCS6909, UCS6912
TM1803, TM1804, TM1809, TM1812
UCS1903, UCS1909, UCS1912, UCS2903, UCS2904B
WS2811, WS2812, WS2812B, SM16703
TM1814
SK6812
|
Control Pixels |
RGB: 340 Pixels*16CH
RGBW: 256 Pixels*16CH
|
Output DMX512 |
Two port (2*512 Channels) |
Working Temp |
-20~55 |
Product Dimension |
L258*W145*H41 (mm) |
Weight (G.W.) |
1100g |
This Artnet-SPI/DMX Pixel light controller is dedicated to converting the Artnet or E1.31 signal into SPI signal,which is designed for large project with high-density pixel light,such as panel lights,construction's contour lamp,etc.Besides converting Artnet or E1.31 based control protocols into various LED driving IC signal , it also outputs DMX512 signal at the same time,convenient for the connection of different types of led lamp,and to achieve the unified control of all kinds of led lamps in the same project.
Feature Function:
1. With LCD display and built-in WEB SERVER setting interface, easy operation
2. Support Ethernet DMX protocal ArtNet and E1.31, can be expanded to other protocols.
3. 16 channels SPI(TTL) signal output, up to 5440 pixels control.
4. Output DMX512 signal at the same time, convenient for the connection of different types LED lamp.
5. Support various LED driving IC, flexible control.
6. Support online firmware upgrade
7. Adopt DIP plug-in design for the easily-worn parts, Users can repair the damage caused by worng wiring or short circuit
8. Built-in test mode, using a networking interface with indicator light, work status is clear when at a glance.
Dimension:
Typical Wiring Schematics: